I’ve just started teaching myself how to sew, so most of my supplies are as basic as you can get. Right before I made my first project, I picked up a cheap pincushion at National Bookstore (a chain of stores here in the Philippines where you can get not only books and periodicals, but also basic arts and crafts materials), but every time I’ve used it I’ve been telling myself that I need to get a better (it’s hard to stick the pins in this one!) not to mention prettier one than this:
So I went online and saw tons, and I mean tons of free tutorials for cute pincushions, like this list here by Tipnut, and this list here by Tip Junkie. There was also this adorable ruffled heart one by The Project Girl and a sweetheart one by Happy Together here. I wanted to make the one by Happy Together but I didn’t have any iron on adhesive on hand, so I went with a tutorial by Paper String Cloth which I had everything on hand for and was just as cute.
First, cut out 8 squares measuring 3 1/2 inches, this already includes your seam allowance of half an inch. Use contrasting or complementing fabric, you can use different patterns or fabric per side if you want, I just used the same cloth for both sides. This cloth is from Cotton Depot (3/F Glorietta 5). Mark seam allowances (1/2 inch per side) on each piece to make it easier to put together.
Sew them together on the seam allowances, making sure that right sides are facing each other. This is how one side looked. Don’t worry too much about getting them totally perfect, we’re going to camouflage any mistakes with a button later. :-) Press them if you want… obviously I didn’t since I figure I’m going to stuff it anyway!
Do this for the remaining 4 squares and pin the two pieces together, right sides facing each other. Stitch on the outer seam allowances, making sure to leave an inch and a half or two inches open so you can stuff your pincushion with whatever material you want. You can use fiberfill, some people use sand, but I used leftover scraps of cloth that I had on hand, and it worked fine. Stuff it as tightly as you like and hand sew it closed. This is what it will look like:
Then take a double thread and a thimble (if you have one, I didn’t and I wish I did) and sew your buttons into the middle of the pincushion. You’ll need the double thread since you have to pull it really hard! I had to use the end of my scissor to push in the needle the first few times, but it gets easier, I promise!
Before you know it, you’re done! Here’s my finished pincushion, I really love it! I threw the generic, old one out right when I transferred the pins. Hehehe.
I used a white button for the other side! :-) It was such a fun, quick, useful project, I just might make more soon!